What is CNC coolant recycling?
CNC coolant recycling means capturing metalworking fluid that would otherwise be thrown away and returning it to the machine for reuse. Large central systems filter and re-mix coolant for a whole plant. For most shops, the quickest win is simpler: stop losing coolant on chips in the first place.
Where your coolant actually goes
On machines with chip conveyors, coolant rides out on the chips and pools in the bottom of the chip bin. That fluid is lost three times over:
- You buy new concentrate and water to top the sump back up.
- You pay to dispose of the wet chips and the pooled fluid as waste.
- Operators spend time draining bins and cleaning up spills.
The benefits of recovering coolant at the machine
- Up to 50% less coolant purchased per machine.
- Up to 90% less coolant sent for disposal.
- Drier chips, which are cleaner to handle and can fetch a better scrap price.
- Less mess on the floor and fewer slip hazards.
- Less manual handling for operators.
Mettis Aerospace calculated about $2,100 a year in coolant and disposal costs for a single machine, and reached payback in around five months after fitting a recovery unit.
How much coolant is your shop losing?
Enter your machine count and coolant spend to see your annual savings and payback period.
How a passive recovery unit works
The Wogaard Coolant Saver runs off the pressure from your machine's existing coolant pump, so it needs no electricity. A vacuum cup sits in the chip bin, draws up pooled coolant through a filter, and sends it back to the sump. It only runs while the machine runs, and most installs take 30 to 45 minutes.
Coolant Saver or Oil Saver?
Pick the Coolant Saver for water soluble coolant on machines with conveyors. Pick the Oil Saver for neat oil and higher viscosity fluids. You need one unit per machine, so savings grow with machine count.
Getting started
Start with your highest-volume machine, measure what goes into the sump for a month, then roll out across the shop. For more than 50 units, a purchase order, or export shipping, contact us. Full specifications are on the Oil & Coolant Filtration page.


