Oil & Coolant Filtration
Recover coolant and oil lost through CNC swarf removal, reduce coolant spend by up to 50% and disposal costs by up to 90% with Wogaard recovery systems.
Stop losing coolant every time you empty a swarf bin
Every time a CNC swarf bin is emptied, usable coolant goes with it, driving up fluid spend, increasing waste disposal costs, and creating mess and manual handling risk on the shop floor. Wogaard's coolant and oil recovery systems capture that fluid before it's lost, returning it directly to the machine's reservoir automatically. The result is measurable savings from day one, with typical payback periods of 3 to 6 months. We are the US distributor for Wogaard, a Danish manufacturer trusted by precision engineering and aerospace manufacturers worldwide.
The business case for coolant recovery
- •Reduce coolant purchases by up to 50% per machine
- •Cut waste disposal volumes and costs by up to 90%
- •Payback typically achieved within 3 to 6 months
- •Improve shop floor housekeeping, safety, and swarf value
Wogaard Coolant Recovery Systems
One unit required per machine. Savings scale linearly with machine count.
Wogaard Coolant Saver
For soluble coolant applications on machines with conveyors. Reclaims soluble coolant dragged into swarf bins and returns it to the machine reservoir automatically.
Key specs
Major benefits
- ✓Up to 50% less coolant usage
- ✓Up to 90% less coolant disposal
- ✓Manpower reduction
- ✓Higher swarf value
- ✓Positive environmental impact
- ✓Improved health & safety and housekeeping
Also suitable for: neat oil up to 12cs on sliding head machines
Wogaard Oil Saver
Reclaims neat oil up to 32cs viscosity that accumulates in swarf bins and returns it to the machine's main reservoir. Same installation principle as the Coolant Saver, designed specifically for neat oil rather than soluble coolant applications. Ideal for sliding head machines and any CNC operation running neat oil rather than soluble coolant.
Key specs
Wogaard A/B Box
Expand and automate your coolant saving by connecting 2 vacuum cups to a single Coolant Saver or Oil Saver unit. One unit services two machines simultaneously, reducing capital investment for shops with multiple similar machines running the same fluid type.
Key specs
Accessories
- Safety Bracket, safe vacuum cup handling during bin changes
- Vacuum Cup Protector, protects the cup from pulls during handling
- Additional Fittings, for non-standard machine layouts
Coolant Saver Savings Calculator
The Wogaard Coolant Saver recovers coolant carried out of the machine with the chips, the wet coolant that pools in the bottom of your chip bin and gets hauled away with the swarf. Our calculator estimates how much of that drag-out you can recover and return to the sump, with a full payback period estimate.
- ✓Typical payback: 3 to 6 months
- ✓Reduce coolant spend up to 50%
- ✓Cut disposal costs up to 90%
- ✓Results scale with machine count
Example estimate (default inputs)
Annual savings
Recovered coolant + reduced disposal
Monthly savings
Recurring benefit per month
Estimated payback
Assumes one unit per machine
Applicable to CNC mills, lathes, and machining centres with wet swarf removal. Results are indicative and will vary by application and operating practice.
How it works
The Coolant Saver connects to your existing coolant pump pressure and uses a venturi effect to create suction at the vacuum cup in the swarf bin. No electrical connection required, it runs entirely from your existing coolant pump.
Coolant waste disposal is regulated under EPA hazardous waste guidelines depending on volume and chemistry. Reducing disposal volumes through coolant recovery directly reduces regulatory exposure and disposal contractor costs. OSHA workplace hygiene standards (29 CFR 1910.141) also benefit from reduced coolant splash and wet floor conditions. Our team can advise on how Wogaard systems support your environmental and workplace compliance obligations.
Trusted via our manufacturer partner
Danish manufacturer of CNC coolant recovery systems
- ✓Precision engineering and aerospace manufacturers worldwide
- ✓Clients include Renishaw, Seco Tools, Mettis Aerospace, Progressive Technology
- ✓Proven in high-volume CNC machine shops across Europe and the US
- ✓Reduce coolant usage by up to 50%, disposal by up to 90%
You might also need
ESPi Industrial Filtration
Keep your workshop air clean from oil mist and metalworking fumes, the natural companion to coolant recovery on the CNC shop floor.
Learn more about ESPi Industrial FiltrationReplacement Parts & Consumables
Replacement vacuum cups, hose sets, and fittings kits for the full Wogaard range.
Learn more about Replacement Parts & ConsumablesCNC Coolant Savings Calculator
Get a full site-specific savings estimate based on your machines and coolant use.
Learn more about CNC Coolant Savings CalculatorGet in touch
We respond within one business day.